1. Before starting the fusion, check if the aluminum layer has been completely removed;

2. Only use Polygon-original peeling tools with undamaged peeling blades. Blunt peeling blades have to be replaced with original ones. It will be necessary to make trial peeling to check the correct setting of the new blade;

3. Push the end of the PP-R stable pipe into the guide of the peeling tool;

4. Peel the outer plastic-layer and aluminum foil. The heating time starts when the pipe and fitting have been pushed to the correct welding depth on the welding tool. After the stipulated heating time, quickly remove pipe and fitting from the welding tools, join them immediately. After the cooling period the fused joint is ready for use. The fittings are the same as PP-R fitting.

[ Back ]

Next:Have no data!

Prev:Have no data!